Macro Dosing Scale
In animal feed production plants, raw materials such as corn, barley, wheat, and soybean meal must be weighed according to the quantities specified in the feed formulation. Inaccurate weighing can change the proportion of ingredients in a batch, affecting feed consistency and the accuracy of the final formulation.
A macro dosing scale is used to weigh major feed ingredients before they proceed to the next production stage. It enables controlled batching of raw materials supplied from dosing silos and helps maintain consistent ingredient proportions throughout production.
KARDEV Machinery manufactures macro dosing scales with different hopper capacities and body configurations, depending on the production requirements and layout of each feed mill.
What Is a Macro Dosing Scale Used For?
A macro dosing scale measures the quantities of major ingredients required for each feed production batch. Its primary function is to ensure that raw materials are weighed according to the specified feed formulation.
For example, if a batch contains more corn and less barley than required, additional mixing cannot correct the ingredient proportions. Accurate weighing must therefore take place before the materials enter the next processing stage.
Raw materials are transferred from dosing silos into the weighing hopper. The weighing system continuously monitors the incoming material, while the automation system controls the feeding equipment according to the programmed recipe.
Once the required quantities have been weighed, the prepared batch is discharged into the receiving hopper and transferred to the next stage of the production line.
The important factor is not simply how long a screw conveyor operates, but how much material actually enters the weighing hopper. This approach helps maintain consistent raw material proportions from one batch to another.
How Does a Macro Dosing Scale Work?
In KARDEV Machinery macro dosing scales, raw materials are supplied from dosing silos through screw conveyors into the weighing hopper.
The hopper is supported by load cells that measure its weight. The weighing indicator transmits measurement data to the computerized control system, allowing the feeding process to be regulated according to the programmed formulation.
Each ingredient is fed into the hopper until its required quantity has been reached. Where several ingredients are weighed sequentially in the same hopper, the automation system can monitor cumulative weight targets while controlling each ingredient separately.
Once the weighing cycle is complete, the bottom discharge gate opens and the batch is emptied into the dosing receiving hopper. The materials are then transferred by conveyors to the next processing stage.
KARDEV macro dosing scales also incorporate a vent pipe to allow air to move during hopper filling and discharge, helping to prevent pressure differences that could interfere with weighing.
Another important consideration is material remaining in the feeding system after the screw conveyor stops. A small quantity of grain may continue falling into the weighing hopper because of the material left between the conveyor outlet and the hopper.
If this additional material is not considered, the final weight may exceed the target. The control system can compensate for this residual flow through appropriate feeding adjustments.
Why Is Macro Dosing Important in Feed Production?
Accurate macro dosing is essential for maintaining the ingredient proportions specified in an animal feed formulation.
A batch may have the correct total weight while containing incorrect quantities of individual ingredients. In such cases, the total weight meets the production target, but the actual formulation does not.
Consider a 1,000 kg feed batch. If 10 kg of extra corn is added while the barley quantity is 10 kg below the target, the total batch weight will still be 1,000 kg.
However, the proportion of the ingredients will be incorrect.
A macro dosing scale helps prevent this problem by allowing major ingredients, such as corn, barley, wheat, and soybean meal, to be weighed and monitored individually.
This is particularly important in feed mills where different formulations are produced throughout the day. Consistent ingredient dosing helps reduce formulation errors and maintain repeatable production conditions.
How Do Load Cells Ensure Accurate Weighing?
KARDEV macro dosing scales use load cells to measure the weight of materials inside the weighing hopper. The weighing indicator transfers the measurement data to the automation system.
Accurate weighing depends not only on the load cells themselves but also on the mechanical installation of the hopper.
If the hopper comes into contact with the supporting structure, part of its weight may bypass the load cells. This can cause incorrect readings even when the load cells are functioning properly.
Rigid or excessively tensioned connections can produce similar problems by transferring external forces to the weighing hopper.
KARDEV scales incorporate flexible, dust-tight upper connections designed to reduce the transmission of mechanical loads from the feeding equipment to the weighing system.
Proper installation, calibration, and regular inspection are essential for maintaining reliable weighing performance.
Dosing Silo Screw Conveyors and Material Feeding System
The feeding system plays an important role in the performance of a macro dosing scale.
In KARDEV installations, raw materials are supplied from dosing silos through screw conveyors. The conveyors transfer the materials into the weighing hopper under the control of the automation system.
If the weighing hopper fills more slowly than expected, the cause may not necessarily be the screw conveyor motor.
Material bridging or restricted flow at the silo outlet can reduce the amount of grain entering the conveyor. Increasing the conveyor speed may not resolve the problem if the material supply itself is restricted.
The feeding system must also account for residual material flow after the screw conveyor stops.
When approaching the target weight, the control system can adjust the feeding process to limit overshooting. Depending on the equipment configuration, appropriate cutoff settings or coarse and fine feeding control may be used.
The objective is to deliver the required ingredient quantity while maintaining a practical weighing cycle time.
Weighing Hopper Ventilation and Pressure Balance
During filling, incoming material displaces air inside the weighing hopper. During discharge, air must enter the hopper to replace the material leaving it.
If air cannot move freely, pressure differences may develop inside the weighing system.
These pressure differences can affect load cell measurements and cause unstable weight readings.
KARDEV macro dosing scales are equipped with a vent pipe to support air movement during filling and discharge.
The ventilation arrangement should remain unobstructed and be inspected periodically. Dust accumulation inside the vent pipe can restrict airflow and contribute to weighing instability.
If the displayed weight fluctuates unexpectedly, the ventilation system should be checked alongside the load cells, mechanical connections, and surrounding equipment.
Bottom Discharge Gate and Material Leakage Prevention
The bottom discharge gate allows the weighed batch to be emptied into the receiving hopper after the weighing cycle is completed.
Proper gate closure is important because material leakage during the next weighing cycle can result in incorrect measurements.
Grain or other raw materials trapped around the sealing surfaces may prevent the gate from closing completely. Even a small opening can allow material to escape while the hopper is being filled.
KARDEV macro dosing scales incorporate a bottom discharge gate designed for controlled material release and proper closure.
Regular inspection and cleaning of the gate area help prevent material accumulation and reduce the risk of leakage between batches.
How Is Macro Dosing Scale Capacity Determined?
The appropriate macro dosing scale capacity depends on the quantity of raw materials required per batch, the bulk density of the ingredients, and the hourly production capacity of the feed mill.
KARDEV Machinery manufactures macro dosing scales in different hopper sizes to suit varying production requirements.
Two feed mills with the same hourly capacity may require different weighing hopper configurations because their formulations, batch weights, and production cycles are not necessarily identical.
- Batch Weight
The weighing system must accommodate the maximum quantity of material to be handled in a single batch.
For example, a plant producing 1,000 kg batches requires a scale designed for the corresponding operating load, while also accounting for the hopper’s own weight and the mechanical conditions of the installation.
If the scale is undersized, a single formulation may require multiple weighing cycles, potentially reducing overall production efficiency.
- Raw Material Bulk Density
Corn, barley, wheat, and soybean meal have different bulk densities.
As a result, the same weight of different ingredients may occupy different volumes inside the weighing hopper.
Hopper sizing must therefore consider both the required batch weight and the volume occupied by the materials.
- Weighing Cycle Time
A larger hopper does not automatically increase production capacity.
The time required to fill the hopper, weigh the ingredients, discharge the batch, and prepare for the next cycle directly affects the number of batches that can be completed per hour.
The scale and its feeding system should be selected according to the required production cycle.
- Weighing Range and Accuracy
A macro dosing scale may need to weigh different ingredient quantities within the same production process.
However, measuring several hundred kilograms and measuring a much smaller quantity do not present the same accuracy requirements.
Load cell selection, weighing range, mechanical installation, and control system settings must therefore be considered together.
The scale should be selected according to both the maximum operating load and the smallest ingredient quantity requiring reliable measurement.
Technical Features of KARDEV Macro Dosing Scales
KARDEV Machinery designs and manufactures macro dosing scales according to the operating requirements of animal feed production plants.
The equipment configuration, hopper volume, and mechanical details can be adapted to the production capacity and available installation space.
- Body Material
The scale body is manufactured from ST37 (S235JR) structural steel. Alternative materials and sheet thicknesses can be provided according to project requirements.
- Weighing Hopper Capacity
Different hopper volumes are available depending on the required batch weight and the bulk density of the raw materials.
The weighing hopper is designed to accommodate the intended operating load while supporting efficient filling and discharge.
- Load Cells and Weighing Indicator
Load cells measure the weight of materials inside the hopper. The weighing indicator provides measurement data to the computerized control system for automated batching.
The load cell capacity and arrangement are selected according to the operating load and weighing requirements.
Stable electrical connections, proper installation, and calibration are important for reliable measurement.
- Flexible Dust-Tight Connection
The upper connection is designed to limit dust leakage while allowing the weighing hopper to remain mechanically independent of the feeding equipment.
Its flexible structure helps reduce external forces that could affect weighing accuracy.
- Vent Pipe
A vent pipe allows air to enter and leave the weighing hopper during filling and discharge.
This helps limit pressure differences that could interfere with the weighing process.
- Maintenance Access Hatch
A maintenance access hatch provides access to the inside of the weighing hopper for inspection and cleaning.
Sufficient clearance should be provided around the hatch during equipment installation.
- Bottom Discharge Gate
The bottom discharge gate releases the weighed batch into the receiving hopper.
Its closure arrangement is designed to limit material leakage between weighing cycles.
The gate area should remain accessible for inspection and cleaning.
Where Is a Macro Dosing Scale Installed in a Feed Mill?
A macro dosing scale is generally installed beneath the raw material dosing silos in an animal feed production plant.
The scale receives materials from the silo discharge equipment, weighs the required ingredients, and releases the completed batch into a receiving hopper.
Depending on the feed mill process design, macro dosing may be incorporated into a pre-grinding or post-grinding batching system.
In a pre-grinding arrangement, the weighed ingredients may be transferred through a magnetic separator before entering the hammer mill or another grinding machine.
The installation layout must provide enough space for the weighing hopper, feeding conveyors, receiving hopper, discharge equipment, and maintenance access.
Available building height is particularly important when installing a new macro dosing scale in an existing feed mill.
Even if the weighing hopper fits within the available space, the receiving hopper and downstream conveyors must also be accommodated.
What Should Be Considered When Choosing a Macro Dosing Scale?
Selecting a macro dosing scale requires more than determining the hourly production capacity of the feed mill.
The number of raw materials in each formulation, the quantity of each ingredient, and the required batch weight must all be evaluated.
The weighing range is particularly important when the quantities of different ingredients vary significantly.
The installation environment should also be considered. Vibrations transmitted from nearby equipment can affect weighing stability, while rigid mechanical connections may interfere with load cell measurements.
Adequate space must be provided for load cell inspection, maintenance access, and discharge gate cleaning.
If additional dosing silos may be installed in the future, the feeding connections and plant layout should be planned accordingly.
KARDEV Machinery manufactures macro dosing scales for animal feed production plants, with hopper capacity and mechanical configuration selected according to each project’s requirements.
Contact KARDEV Machinery to discuss your feed mill capacity, batch weight, raw material characteristics, and available installation space.





